Discussion:
Use olsr on devices running wive-ng (RTL8186)
ANDERSON JUNIOR GADO DA SILVA
2014-01-18 22:14:13 UTC
Permalink
Good evening, I'm brazilian, already I apologize for my bad English.
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA% 2FB% 29%
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if anyone used or
uses olsr this firmware.

Att
Anderson Junior
Henning Rogge
2014-01-20 15:13:40 UTC
Permalink
Post by ANDERSON JUNIOR GADO DA SILVA
Good evening, I'm brazilian, already I apologize for my bad English.
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA% 2FB% 29%
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if anyone used
or uses olsr this firmware.
Kernel 2.4 is quite old, but I think it should work. Olsrd has been used
with 2.4 kernels for a long time with OpenWRT.

Henning Rogge
--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961, Fax +49 228 9435 685
mailto:***@fkie.fraunhofer.de http://www.fkie.fraunhofer.de
ANDERSON JUNIOR GADO DA SILVA
2014-01-20 16:03:37 UTC
Permalink
ok, thanks for replying, I think I'll have to download the sources and
compile the olsr, my biggest concern is with dependencies libs, have any
documents that meet these dependencies?. my current linux is CentOS 5, you
could direct me to an environment to compile olsr. I concigo compile
programs in linux, but never compiled for other platforms such as mips.

Att
Anderson Junior
Post by Henning Rogge
Post by ANDERSON JUNIOR GADO DA SILVA
Good evening, I'm brazilian, already I apologize for my bad English.
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA% 2FB% 29%
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if anyone used
or uses olsr this firmware.
Kernel 2.4 is quite old, but I think it should work. Olsrd has been used
with 2.4 kernels for a long time with OpenWRT.
Henning Rogge
--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961, Fax +49 228 9435 685
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
Ferry Huberts
2014-01-20 16:19:32 UTC
Permalink
Post by ANDERSON JUNIOR GADO DA SILVA
ok, thanks for replying, I think I'll have to download the sources and
compile the olsr, my biggest concern is with dependencies libs, have any
documents that meet these dependencies?. my current linux is CentOS 5,
you could direct me to an environment to compile olsr. I concigo compile
programs in linux, but never compiled for other platforms such as mips.
olsrd v1 has no other dependencies than the standard C library.
Plugins can have extra dependencies though.
Post by ANDERSON JUNIOR GADO DA SILVA
Att
Anderson Junior
Post by ANDERSON JUNIOR GADO DA SILVA
Good evening, I'm brazilian, already I apologize for my bad English.
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA% 2FB% 29%
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if anyone
used
Post by ANDERSON JUNIOR GADO DA SILVA
or uses olsr this firmware.
Kernel 2.4 is quite old, but I think it should work. Olsrd has been used
with 2.4 kernels for a long time with OpenWRT.
Henning Rogge
--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961 <tel:%2B49%20228%209435-961>, Fax +49 228
9435 685 <tel:%2B49%20228%209435%20685>
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
--
Ferry Huberts
--
Olsr-users mailing list
Olsr-***@lists.olsr.org
https://lists.olsr.org/mailman/listinfo/olsr-users
Henning Rogge
2014-01-20 17:21:34 UTC
Permalink
Hi,

you still need Flex, Bison and GNU Make for building it, but as Ferry said
its not necessary to have these things on your target platform.

Henning
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
ok, thanks for replying, I think I'll have to download the sources and
compile the olsr, my biggest concern is with dependencies libs, have any
documents that meet these dependencies?. my current linux is CentOS 5,
you could direct me to an environment to compile olsr. I concigo compile
programs in linux, but never compiled for other platforms such as mips.
olsrd v1 has no other dependencies than the standard C library.
Plugins can have extra dependencies though.
Post by ANDERSON JUNIOR GADO DA SILVA
Att
Anderson Junior
Post by ANDERSON JUNIOR GADO DA SILVA
Good evening, I'm brazilian, already I apologize for my bad
English.
Post by ANDERSON JUNIOR GADO DA SILVA
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA% 2FB%
29%
Post by ANDERSON JUNIOR GADO DA SILVA
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if anyone
used
Post by ANDERSON JUNIOR GADO DA SILVA
or uses olsr this firmware.
Kernel 2.4 is quite old, but I think it should work. Olsrd has been used
with 2.4 kernels for a long time with OpenWRT.
Henning Rogge
--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961 <tel:%2B49%20228%209435-961>, Fax +49 228
9435 685 <tel:%2B49%20228%209435%20685>
http://www.fkie.fraunhofer.de
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
--
Ferry Huberts
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
ANDERSON JUNIOR GADO DA SILVA
2014-01-20 18:22:44 UTC
Permalink
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
ok, thanks for replying, I think I'll have to download the sources and
compile the olsr, my biggest concern is with dependencies libs, have any
documents that meet these dependencies?. my current linux is CentOS 5,
you could direct me to an environment to compile olsr. I concigo compile
programs in linux, but never compiled for other platforms such as mips.
olsrd v1 has no other dependencies than the standard C library.
Plugins can have extra dependencies though.
thanks for replying, but the latest version of the project site I found was
this: http://www.olsr.org/releases/0.6/olsrd-0.6.6.1.tar.bz2
this correct?
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
Att
Anderson Junior
Post by ANDERSON JUNIOR GADO DA SILVA
Good evening, I'm brazilian, already I apologize for my bad
English.
Post by ANDERSON JUNIOR GADO DA SILVA
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA% 2FB%
29%
Post by ANDERSON JUNIOR GADO DA SILVA
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if anyone
used
Post by ANDERSON JUNIOR GADO DA SILVA
or uses olsr this firmware.
Kernel 2.4 is quite old, but I think it should work. Olsrd has been
used
with 2.4 kernels for a long time with OpenWRT.
Henning Rogge
--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961 <tel:%2B49%20228%209435-961>, Fax +49 228
9435 685 <tel:%2B49%20228%209435%20685>
http://www.fkie.fraunhofer.de
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
--
Ferry Huberts
--
Att. Anderson Junior
SoftCorp Informatica e Provedor
www.softcorpvirtual.com -- ***@softcorpvirtual.com
Msn: softcorp-***@hotmail.com
Skype: scinfovirtual
(66)3555-1943 / 8423-7102
Av. Tamburello, 70, Vila nova, 78330-000
Cotriguaçu - MT
Henning Rogge
2014-01-20 18:29:45 UTC
Permalink
This is the latest release, you can also get the latest code from our git
repository:

http://olsr.org/git/?p=olsrd.git;a=summary

Henning Rogge


On Mon, Jan 20, 2014 at 7:22 PM, ANDERSON JUNIOR GADO DA SILVA <
Post by ANDERSON JUNIOR GADO DA SILVA
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
ok, thanks for replying, I think I'll have to download the sources and
compile the olsr, my biggest concern is with dependencies libs, have any
documents that meet these dependencies?. my current linux is CentOS 5,
you could direct me to an environment to compile olsr. I concigo compile
programs in linux, but never compiled for other platforms such as mips.
olsrd v1 has no other dependencies than the standard C library.
Plugins can have extra dependencies though.
thanks for replying, but the latest version of the project site I found
was this: http://www.olsr.org/releases/0.6/olsrd-0.6.6.1.tar.bz2
this correct?
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
Att
Anderson Junior
Post by ANDERSON JUNIOR GADO DA SILVA
Good evening, I'm brazilian, already I apologize for my bad
English.
Post by ANDERSON JUNIOR GADO DA SILVA
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA% 2FB%
29%
Post by ANDERSON JUNIOR GADO DA SILVA
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if anyone
used
Post by ANDERSON JUNIOR GADO DA SILVA
or uses olsr this firmware.
Kernel 2.4 is quite old, but I think it should work. Olsrd has been
used
with 2.4 kernels for a long time with OpenWRT.
Henning Rogge
--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961 <tel:%2B49%20228%209435-961>, Fax +49 228
9435 685 <tel:%2B49%20228%209435%20685>
http://www.fkie.fraunhofer.de
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
--
Ferry Huberts
--
Att. Anderson Junior
SoftCorp Informatica e Provedor
Skype: scinfovirtual
(66)3555-1943 / 8423-7102
Av. Tamburello, 70, Vila nova, 78330-000
Cotriguaçu - MT
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
ANDERSON JUNIOR GADO DA SILVA
2014-01-20 18:28:43 UTC
Permalink
thanks again friend, GNU Make is already installed, I'll search on Flex and
Bison, is still unclear for me on x86_64 build for mips, but I'll try
tirelessly to conceguir, thank you all.

Att
Anderson Junior
Post by Henning Rogge
Hi,
you still need Flex, Bison and GNU Make for building it, but as Ferry said
its not necessary to have these things on your target platform.
Henning
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
ok, thanks for replying, I think I'll have to download the sources and
compile the olsr, my biggest concern is with dependencies libs, have any
documents that meet these dependencies?. my current linux is CentOS 5,
you could direct me to an environment to compile olsr. I concigo compile
programs in linux, but never compiled for other platforms such as mips.
olsrd v1 has no other dependencies than the standard C library.
Plugins can have extra dependencies though.
Post by ANDERSON JUNIOR GADO DA SILVA
Att
Anderson Junior
Post by ANDERSON JUNIOR GADO DA SILVA
Good evening, I'm brazilian, already I apologize for my bad
English.
Post by ANDERSON JUNIOR GADO DA SILVA
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA% 2FB%
29%
Post by ANDERSON JUNIOR GADO DA SILVA
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if anyone
used
Post by ANDERSON JUNIOR GADO DA SILVA
or uses olsr this firmware.
Kernel 2.4 is quite old, but I think it should work. Olsrd has been
used
with 2.4 kernels for a long time with OpenWRT.
Henning Rogge
--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961 <tel:%2B49%20228%209435-961>, Fax +49 228
9435 685 <tel:%2B49%20228%209435%20685>
http://www.fkie.fraunhofer.de
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
--
Ferry Huberts
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
ANDERSON JUNIOR GADO DA SILVA
2014-01-20 18:33:30 UTC
Permalink
ok, thanks, I'll download the latest.

Att
Anderson Junior
Post by Henning Rogge
This is the latest release, you can also get the latest code from our git
http://olsr.org/git/?p=olsrd.git;a=summary
Henning Rogge
On Mon, Jan 20, 2014 at 7:22 PM, ANDERSON JUNIOR GADO DA SILVA <
Post by ANDERSON JUNIOR GADO DA SILVA
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
ok, thanks for replying, I think I'll have to download the sources and
compile the olsr, my biggest concern is with dependencies libs, have any
documents that meet these dependencies?. my current linux is CentOS 5,
you could direct me to an environment to compile olsr. I concigo compile
programs in linux, but never compiled for other platforms such as mips.
olsrd v1 has no other dependencies than the standard C library.
Plugins can have extra dependencies though.
thanks for replying, but the latest version of the project site I found
was this: http://www.olsr.org/releases/0.6/olsrd-0.6.6.1.tar.bz2
this correct?
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
Att
Anderson Junior
Post by ANDERSON JUNIOR GADO DA SILVA
Good evening, I'm brazilian, already I apologize for my bad
English.
Post by ANDERSON JUNIOR GADO DA SILVA
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA%
2FB% 29%
Post by ANDERSON JUNIOR GADO DA SILVA
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if anyone
used
Post by ANDERSON JUNIOR GADO DA SILVA
or uses olsr this firmware.
Kernel 2.4 is quite old, but I think it should work. Olsrd has been
used
with 2.4 kernels for a long time with OpenWRT.
Henning Rogge
--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961 <tel:%2B49%20228%209435-961>, Fax +49
228
9435 685 <tel:%2B49%20228%209435%20685>
http://www.fkie.fraunhofer.de
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
--
Ferry Huberts
ANDERSON JUNIOR GADO DA SILVA
2014-01-21 09:58:45 UTC
Permalink
Good morning! prepared the environment, I am now looking for information on
documentation and also on the internet to compile for mips, yet do not
succeed, but keep looking.

Att
Anderson Junior
Post by ANDERSON JUNIOR GADO DA SILVA
ok, thanks, I'll download the latest.
Att
Anderson Junior
Post by Henning Rogge
This is the latest release, you can also get the latest code from our git
http://olsr.org/git/?p=olsrd.git;a=summary
Henning Rogge
On Mon, Jan 20, 2014 at 7:22 PM, ANDERSON JUNIOR GADO DA SILVA <
Post by ANDERSON JUNIOR GADO DA SILVA
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
ok, thanks for replying, I think I'll have to download the sources and
compile the olsr, my biggest concern is with dependencies libs, have
any
documents that meet these dependencies?. my current linux is CentOS 5,
you could direct me to an environment to compile olsr. I concigo
compile
programs in linux, but never compiled for other platforms such as mips.
olsrd v1 has no other dependencies than the standard C library.
Plugins can have extra dependencies though.
thanks for replying, but the latest version of the project site I found
was this: http://www.olsr.org/releases/0.6/olsrd-0.6.6.1.tar.bz2
this correct?
Post by Ferry Huberts
Post by ANDERSON JUNIOR GADO DA SILVA
Att
Anderson Junior
Post by ANDERSON JUNIOR GADO DA SILVA
Good evening, I'm brazilian, already I apologize for my bad
English.
Post by ANDERSON JUNIOR GADO DA SILVA
I'm new to the list, this is my first post.
I have some devices running wive-ng
site: http://wive-ng.sourceforge.net/?WIVE-NG_8186_ 28revA%
2FB% 29%
Post by ANDERSON JUNIOR GADO DA SILVA
download: http://sourceforge.net/projects/wive-ng/
is a linux 2.4 kernel with quite minimal, was wondering if
anyone
used
Post by ANDERSON JUNIOR GADO DA SILVA
or uses olsr this firmware.
Kernel 2.4 is quite old, but I think it should work. Olsrd has
been used
with 2.4 kernels for a long time with OpenWRT.
Henning Rogge
--
Diplom-Informatiker Henning Rogge , Fraunhofer-Institut für
Kommunikation, Informationsverarbeitung und Ergonomie FKIE
Kommunikationssysteme (KOM)
Fraunhofer Straße 20, 53343 Wachtberg, Germany
Telefon +49 228 9435-961 <tel:%2B49%20228%209435-961>, Fax +49
228
9435 685 <tel:%2B49%20228%209435%20685>
http://www.fkie.fraunhofer.de
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
--
Ferry Huberts
Loading...