Discussion:
How do I make two devices running olsrd , connect
Nkosikhona Dlamini
2013-06-03 15:31:40 UTC
Permalink
Hi All ,

I am a newBie on olsrd . I have installed it to my Pc and cubieboard.

this a what is displayed when i run (on both PC nd cubienboard) # olsrd
-nofork
***@santiware-Inspiron-3520:/home/santiware# sudo olsrd -nofork

*** olsr.org - 0.6.3-git_-hash_cfd7c48ab5a78db3e70cfdece616addb - ***
Build date: 2013-04-06 06:14:10 on batsu
http://www.olsr.org

Parsing file: "/etc/olsrd/olsrd.conf"
Debug level: 0
setting ifs_in_curr_cfg = 0
Autodetect changes: YES
IPv4 broadcast: 255.255.255.255
HELLO interval: 6.00
HELLO validity: 600.00
TC interval: 0.50
TC validity: 300.00
MID interval: 10.00
MID validity: 300.00
HNA interval: 10.00
HNA validity: 300.00
Link quality fish eye 1
IpVersion: 4
Clear screen enabled
Noint set to 1
Willingness: 7
IPC host: 127.0.0.1
IPC net: 192.168.1.0/255.255.255.0
Hysteresis disabled
Link quality level 2
Pollrate 0.10
TC redundancy 2
MPR coverage 5
IPv4 broadcast/multicast : 255.255.255.255
Mode : mesh
IPv6 multicast : ::
HELLO emission/validity : 6.00 (d)/600.00 (d)
TC emission/validity : 0.50 (d)/300.00 (d)
MID emission/validity : 10.00 (d)/300.00 (d)
HNA emission/validity : 10.00 (d)/300.00 (d)
Autodetect changes : yes
IPv4 broadcast/multicast : 255.255.255.255
Mode : mesh
IPv6 multicast : ::
HELLO emission/validity : 6.00 (d)/600.00 (d)
TC emission/validity : 0.50 (d)/300.00 (d)
MID emission/validity : 10.00 (d)/300.00 (d)
HNA emission/validity : 10.00 (d)/300.00 (d)
Autodetect changes : yes
-- ALL PLUGINS LOADED! --

now I am requesting for advise on how to make a connection between my Pc
an my Cubieboard

Thanking you guyz in advance for you help .
Henning Rogge
2013-06-03 15:36:04 UTC
Permalink
See if the two nodes can ping each other without Olsrd... if not, your
layer-2 connection or your IP settings of the interfaces are wrong.

Henning Rogge

On Mon, Jun 3, 2013 at 5:31 PM, Nkosikhona Dlamini
Post by Nkosikhona Dlamini
Hi All ,
I am a newBie on olsrd . I have installed it to my Pc and cubieboard.
this a what is displayed when i run (on both PC nd cubienboard) # olsrd
-nofork
*** olsr.org - 0.6.3-git_-hash_cfd7c48ab5a78db3e70cfdece616addb - ***
Build date: 2013-04-06 06:14:10 on batsu
http://www.olsr.org
Parsing file: "/etc/olsrd/olsrd.conf"
Debug level: 0
setting ifs_in_curr_cfg = 0
Autodetect changes: YES
IPv4 broadcast: 255.255.255.255
HELLO interval: 6.00
HELLO validity: 600.00
TC interval: 0.50
TC validity: 300.00
MID interval: 10.00
MID validity: 300.00
HNA interval: 10.00
HNA validity: 300.00
Link quality fish eye 1
IpVersion: 4
Clear screen enabled
Noint set to 1
Willingness: 7
IPC host: 127.0.0.1
IPC net: 192.168.1.0/255.255.255.0
Hysteresis disabled
Link quality level 2
Pollrate 0.10
TC redundancy 2
MPR coverage 5
IPv4 broadcast/multicast : 255.255.255.255
Mode : mesh
HELLO emission/validity : 6.00 (d)/600.00 (d)
TC emission/validity : 0.50 (d)/300.00 (d)
MID emission/validity : 10.00 (d)/300.00 (d)
HNA emission/validity : 10.00 (d)/300.00 (d)
Autodetect changes : yes
IPv4 broadcast/multicast : 255.255.255.255
Mode : mesh
HELLO emission/validity : 6.00 (d)/600.00 (d)
TC emission/validity : 0.50 (d)/300.00 (d)
MID emission/validity : 10.00 (d)/300.00 (d)
HNA emission/validity : 10.00 (d)/300.00 (d)
Autodetect changes : yes
-- ALL PLUGINS LOADED! --
now I am requesting for advise on how to make a connection between my Pc an
my Cubieboard
Thanking you guyz in advance for you help .
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
--
We began as wanderers, and we are wanderers still. We have lingered
long enough on the shores of the cosmic ocean. We are ready at last to
set sail for the stars - Carl Sagan
--
Olsr-users mailing list
Olsr-***@lists.olsr.org
https://lists.olsr.org/mailman/listinfo/olsr-users
Loading...