Discussion:
OSLRd Debug Level Issue
Joshua McKee
2014-10-20 18:25:48 UTC
Permalink
Hi,

After upgrading to 0.6.7, I am having the following issue:

Setting the DebugLevel parameter in the configuration file to 0 doesn't
seem to work (it still defaults to 1). However, setting -d 0 when running
olsrd works.

I noticed this issue because I run OLSRd through either remote or startup
scripts, and it caused issues with my setup after my upgrade to 0.6.7.

Thanks,
Josh
Ferry Huberts
2014-10-20 18:29:08 UTC
Permalink
Post by Joshua McKee
Hi,
Setting the DebugLevel parameter in the configuration file to 0 doesn't
seem to work (it still defaults to 1). However, setting -d 0 when
running olsrd works.
I noticed this issue because I run OLSRd through either remote or
startup scripts, and it caused issues with my setup after my upgrade to
0.6.7.
upgrade from what version?

can you bisect?
Post by Joshua McKee
Thanks,
Josh
--
Ferry Huberts
--
Olsr-users mailing list
Olsr-***@lists.olsr.org
https://lists.olsr.org/mailman/listinfo/olsr-users
Henning Rogge
2014-10-20 18:58:12 UTC
Permalink
My guess would be that its commit
e723a410e1451dad84e8b8401021ad731df77304, we decided to move the
"non-Openwrt" default configuration file to /etc/olsrd/olsrd.conf

@Joshua, can you move your configuration file into
/etc/olsrd/olsrd.conf and test again?

Henning
Post by Ferry Huberts
Post by Joshua McKee
Hi,
Setting the DebugLevel parameter in the configuration file to 0 doesn't
seem to work (it still defaults to 1). However, setting -d 0 when
running olsrd works.
I noticed this issue because I run OLSRd through either remote or
startup scripts, and it caused issues with my setup after my upgrade to
0.6.7.
upgrade from what version?
can you bisect?
Post by Joshua McKee
Thanks,
Josh
--
Ferry Huberts
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
--
Olsr-users mailing list
Olsr-***@lists.olsr.org
https://lists.olsr.org/mailman/listinfo/olsr-users
Joshua McKee
2014-10-21 06:02:00 UTC
Permalink
Yes, it works now.

Thanks!
Post by Henning Rogge
My guess would be that its commit
e723a410e1451dad84e8b8401021ad731df77304, we decided to move the
"non-Openwrt" default configuration file to /etc/olsrd/olsrd.conf
@Joshua, can you move your configuration file into
/etc/olsrd/olsrd.conf and test again?
Henning
Post by Ferry Huberts
Post by Joshua McKee
Hi,
Setting the DebugLevel parameter in the configuration file to 0 doesn't
seem to work (it still defaults to 1). However, setting -d 0 when
running olsrd works.
I noticed this issue because I run OLSRd through either remote or
startup scripts, and it caused issues with my setup after my upgrade to
0.6.7.
upgrade from what version?
can you bisect?
Post by Joshua McKee
Thanks,
Josh
--
Ferry Huberts
--
Olsr-users mailing list
https://lists.olsr.org/mailman/listinfo/olsr-users
Loading...